DM4170 – Installation Manual
Installing the DM4170
204.4308.03
9
2
GETTING STARTED
S
AFETY WARNINGS
Before proceeding, carefully observe the following safety warnings:
Before installation, the entire manual must be read carefully. If you have any
questions, you should contact the authorized technical support.
Pay attention to the safety instructions during the installation, operation and
maintenance of this product. The installation, operation and maintenance
procedures should preferably be performed by qualified and trained personnel
authorized to carry out such tasks.
To prevent the risk of electric shocks, before connecting the equipment or
connecting cables, ensure the installation and operation of a grounding system.
Optical modules use invisible radiation laser transmitters. Although most
SFP/SFP+/QSFP+ on the market
meet
LASER safety specifications, never look
directly at the terminals of a module or an optical cord. Exposure to laser
emission may cause partial or total loss of vision.
P
RODUCT OVERVIEW
The DM4170 product line has two product versions as illustrated below. Both versions are
covered by this installation guide.
Figure 1 - DM4170 24GX+12XS
Figure 2 - DM4170 24GX+4XS+2QX
