© 2017 Datacom Systems Inc
14
SS-1200, SS-2200, SS-4200 Series USERguide
3.4.4
Copper Any-To-Any Ports
These ports can be dynamically assigned as output ports or additional input ports. Configuring the
ports as input ports allows you to connect SPAN ports or additional Taps to the SINGLEstream™.
When configured as output ports, they provide network tools access to traffic from all input ports.
3.4.5
SFP Any-To-Any Ports
These ports can be dynamically assigned as output ports or additional input ports. Configuring the
ports as input ports allows you to connect SPAN ports or additional Taps to the SINGLEstream™.
When configured as output ports, they provide network tools access to traffic from all input ports.
Depending on what type of SFP is inserted into the port, they may be used as 1G Copper ports, 1G
Multimode Fiber ports, or 1G Singlemode ports. For best results, make sure that you are using a
Datacom tested and approved SFP.
3.4.6
Management Port
The Management port is used for Telnet, SSH, and SNMP features. It is used for remote
connectivity and configuration of the SINGLEstream, and for SNMP traps/alerts. This can be
connected directly to a PC, or through a network switch for remote access.
