Datacolor Ahiba Ahiba MULTIPRECISE TC, Руководство пользователя

Страница: 84 / 103

ahiba 83
AHIBA MULTIPRECISE TC - Protection
Excess Temperature
As soon as the dye chamber sensor
registers a temperature in excess of 140°C,
the heater is shut off automatically and
cooling water starts flowing.
Excess Pressure
An automatic pressure relief valve inside
the unit is set to automatically release
pressure at 5 bar ± 0.5 bar.
A manual pressure relief valve located in
front of the beaker may be activated by
pushing down the button. It will release
excess pressure to the drain manifold.
Before opening a beaker lid, hold
down the manual pressure relief
valve and watch the pressure
gauge on the front of the unit. Make
sure the pressure reading is at “0”
before opening the beaker lid.
Glass Protection
The dye chamber is protected by inside and
outside lexan protective tubing. The inside
protective tube must not be removed from
the beaker. The outside protective tubing
must remain installed if dyeing is done
under pressure or if dyeing temperature is
above 85°C (185°F).