Datacolor Ahiba Ahiba MULTIPRECISE TC, Руководство пользователя

Страница: 62 / 103

ahiba 61
AHIBA MULTIPRECISE TC - Witing a Dyeing Program
General Information
• The local memory can accommodate up to 99 programs.
• The memory card can accommodate up to 99 programs.
• A program may contain up to 60 steps.
• A step consists of two types, a Function or a Process. A step for a Process consist of
Temperature, Gradient, Time, Flow, and Dosing. A step for a Function can be any
one of these function: FILL, RINSE, PRESSURE, VACUUM, DRAIN, HOLD.
Note: Programming can be executed from either active unit.
Procedure:
1
2
3
4
5
6
7
8
With cursor [ ] / [ ] choose EDIT PROGRAM in the main menu. Press
[ENTER] to activate the submenu.
Choose DIR PROGRAMS. Press [ENTER] to activate the program directory
submenu.
The display now shows a complete overview of the program memory
positions that have been used.
Press [ESC] once to return to the EDIT PROGRAM menu.
With the cursor [ ] / [ ] choose EDIT PROGRAM No._.
Enter the number of the program to be created or the number of an existing
program. Press
[ENTER] . The first step is displayed.
The first step is to name the program. The default name “NEW” will appear.
See section Menu: “Edit Program names”. Press
[ENTER] to accept file name
and proceed with program editing.
Enter the program values by referring to the example on the following page.
This is a simple example of a dyeing process. Try to program this example.