Page 127
Notice to Users of Printers Equipped with Contactless Smart Card Reader
The contactless smart card reader emits radio-frequency waves and must be used as installed and recommended by
Datacard, the printer manufacturer. You may not modify the reader or how it is used without the written permission of
Datacard. You may not operate the printer after modifying the reader or its method of operation.
Liability statement
This Datacard product has been built to the high standards of DataCard® Corporation (doing business as Datacard
Group). Please note and heed the WARNING and CAUTION labels that have been placed on the equipment for your
safety. Please do not attempt to operate or repair this equipment without adequate training. Any use, operation or
repair in contravention of this document is at your own risk. By acceptance of this system you hereby assume all
liability consequent to your use or misuse of this equipment. DataCard® Corporation assumes no liability for
incidental, special or consequential damage of any kind. Equipment specifications, applications and options are
subject to change at the sole discretion of DataCard® Corporation without notice.
Safety
All Datacard products are built to strict safety and reliability specifications in accordance with UL60950 and Canadian
requirements, and the Low Voltage Directive 73/23/EEC. Therefore, safety issues pertaining to operation and repair
of Datacard equipment are primarily environmental and human interface.
The following basic safety tips are given to ensure safe installation, operation and maintenance of Datacard
equipment and are not to be considered as comprehensive on all matters of safety.
Safe environment
•
Connect equipment to a grounded facility power source. Do not defeat or bypass the ground lead.
•
Do not use this product in an environment containing volatile or flammable compounds.
•
Place the equipment on a stable surface (table) and ensure floors in the work area are dry and non-slip.
Insulated rubber floor mats are preferred.
