DataCard SD260L, Руководство пользователя

Страница: 92 / 102

A-4 SD460 Laminating System
Inside the Laminator
The SD460 system has one standard laminator, in the L1 position, with an optional second
laminator in the L2 position. The laminators apply topcoat or patch overlay material to the card.
Topcoat is a continuous film and patch is a die ‐ cut polyester shape. Both laminators can apply
either overlay type. Refer to “Laminator Overlay Materials” on page A ‐ 6 .
Manual Advance Knobs The manual advance knobs move the card through the
laminator to remove it from the system. Use the knobs to clear
a card jam.
L1 Laminator (green
cartridge)
The L1 laminator cartridge holds overlay material and applies
it to the card.
L2 Laminator (orange
cartridge)
The L2 laminator cartridge holds overlay material and applies
it to the card. The L2 laminator is optional.
Laminator Access Door The access door provides access to the L1 and L2 laminators to
load supplies or to clear a card jam.
L2 Transport Access Door The L2 transport access door replaces the L2 laminator
cartridge if the optional L2 laminator is not installed. Open the
door to access the laminator card transport.
L2 Laminator
L2 Transport
Access Door
Manual Advance
Knobs
L1 Laminator
Laminator Access
Door