DataCard SD260L, Руководство пользователя

Страница: 37 / 102

SD260L/SD360/SD460 Card Printers User’s Guide 25
Chapter 4: Printing Cards
Before Starting to Print
This section explains how to print a card. Make sure that:

Cards are loaded in the printer or available to insert.

Ribbon is loaded in the printer. For the steps to follow, refer to “Load the Print Ribbon” on
page 23 . If you are using the SD460 system, refer to Appendix A: "SD460 Laminating System”
for information about preparing the laminator.

The card design is set up. If you need to set up or modify the design, refer to “Elements of
Card Design” in your printer’s Installation and Administrator’s Guide .
H
INTS
& T
IPS

Make sure that magnetic stripe cards are loaded correctly. The printer shows the correct
position.

Do not touch the card surface to be printed. Handle cards by their edges or wear gloves.
You also can:

Print a test card directly from the printer. Refer to “Print a Test Card” on page 22.

Print a driver sample card. Refer to “Print a Driver Sample Card” in your card printer’s Driver
Guide .