DataCard CE870, Инструкция по установке и руководство администратора

Страница: 95 / 130

CE870 Instant Issuance System Installation and Administrator’s Guide 83

KPower—Modify the print intensity for K (single-color) panel or K (single-color) ribbon.

Increase the value to make single-color printing thicker and more defined on the card.

Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.

KPower1200DPI—Modify the print intensity at 1200 dpi for the K panel or K ribbon.

Increase the value to make single-color printing thicker and more defined on the card.

Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.

KPower600DPI—Modify the print intensity at 600 dpi for the K panel or K ribbon.

Increase the value to make single-color printing thicker and more defined on the card.

Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.

KPowerDuplex—Modify the print intensity for the back-side K panel and K ribbons.

Increase the value to make single-color printing thicker and more defined on the card.

Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.

KWhiteShade—Modify the amount of power applied to the printhead to reduce ribbon
friction without transferring material. Decrease the value if material transfers to the card
when it should not.

LeadTrim—Modify the number of millimeters to remove from the leading edge of a full-size
image to keep it within the print area (1 mm = 0.0394 in. or about 11.8 dot rows).

SettingsGroupPurpose—State the purpose of a settings group. Group names are not
changeable. Use this option to identify the reason for creating a settings group.

TPower—Modify the intensity of the T (topcoat) ribbon panel.

Increase the value to make printed topcoat thicker or more uniform.

Decrease the value to prevent frequent ribbon breaks while printing the topcoat.

TPowerDuplex—Modify the intensity of the back-side T (topcoat) ribbon panel.

Increase the value to make printed topcoat thicker or more uniform.

Decrease the value to prevent ribbon breaks while printing the topcoat.