DataCard CD800, Руководство пользователя, Страница: 93 / 114

CD800 Card Printer User’s Guide 79
205: L1 supply not identified
The laminator cannot use the supply installed.
Use supplies designed for this laminator.
206: L2 supply problem
The L2 supply is not moving properly. To try another card:
1.
Open the laminator and remove the L2 cartridge.
2.
Reposition, repair, or replace the supply and advance the repaired area one
full turn.
3.
Replace the cartridge and close the laminator.
207: L2 supply out or missing
The laminator does not have usable supplies.
1.
Open the laminator.
2.
Replace the supply.
3.
Close the laminator.
208: L2 supply type problem
The laminator cannot use the supply installed.
Use supplies designed for this laminator.
209: L2 supply not supported
The laminator cannot use the supply installed.
Use supplies designed for this laminator.
210: L2 supply not identified
The laminator cannot use the supply installed.
Use supplies designed for this laminator.
211: L1 heater problem
The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.