4 Using the control module
Clarity Controls
4.3 Device Monitor
The pump status dialog can be invoked by the
Monitor - Device Monitor
command from the
Instrument
window or using the Device Monitor
icon. It displays the actual flows of particular solvents, as well as the total
flow, the total pressure and the analysis time. In the individual section of
the
Shimadzu LC-10/20 Pump
the status of the pump may be seen.
Fig 8: LC monitor and Shimadzu LC-10/20 Pump Monitor
Stop Flow
The pumps can be stopped from this window using the
Stop Flow
button.
This action will stop the pump only, the analysis run will continue and
must be stopped or aborted from the
Data Acquisition
window or
Single
Analysis
dialog.
Purge
The pumps may be purged by pressing this button. Set the desired total
flow and solvent ratios in the opened
Set Flow
dialog.
Fig 9: Set Flow
Resume Idle
Returns the pumps to
IDLE
state as defined in the appropriate field on the
LC Gradient
tab of the
Method Setup
dialog.
- 12 -
