Shimadzu LC-10/20 Pump
4 Using the control module
4 Using the control module
New
LC Gradient
tab appears in the
Method Setup
dialog, enabling the
setting of the LC gradient program.
4.1 Method Setup - LC Gradient
The
Method Setup - LC Gradient
dialog serves for setting up the LC
instrument method.
Fig 5: Method Setup - LC Gradient
Gradient Table
A table for setting the composition of the mobile phase and the overall
flow rate as a function of time. Operation is analogous to that of
spreadsheets (Excel, Quatro Pro, etc.). To prepare the cell to receive
values, click it by the left mouse button; the cell will highlight by dots. A cell
that fails to highlight is not available for editing.
Time [min.]
Sets the time at which the ratio of flow rates and the overall flow rate
correspond to the values entered in the corresponding row. (These
values vary continuously from one time to the next in a manner
ensuring that the conditions specified in the next row are satisfied).
XXX1 (..4) [%]
Represents the percentage of a component. The designation
XXX1-4
is in fact replaced by the name of the component (items
Solvent 1 - 4
in the
Gradient Options
dialog). Should you enter a component value
such that the sum of all values exceeds 100 %, the percentage in the
- 7 -
