Shimadzu GC-2014C
3 Installation Procedure
5
•
Fill in the
Port
,
Baud Rate
and
Name
according to the
settings and the connection of the GC (for more details see
chapter
Shimadzu GC-2014C Setup
on pg.
19
).
•
Press the
Autodetect
button to read all settings from the
instrument and apply them in the
Shimadzu GC-2014C Setup
dialog.
It is strongly recommended not to change the settings gained
through the
Autodetect
function. When opening the
Instrument
window, those settings are checked against the
settings of the GC and in case they are not the same the
warning message is issued and no control is possible.
•
Switch to the
Signals
tab (for more details see the
Shimadzu
GC-2014C Setup
dialog section later in the manual), select the
correct number of signals you want to acquire, name them
and possibly check the
Enable to start device(s) from
Clarity
checkbox. Press the
OK
button.
•
The
Shimadzu GC-2014C
item will appear in the
Setup
Control Modules
list of the
System Configuration
dialog.
•
Drag the GC icon from the
Setup Control Modules
list on
the left side to the desired
Instrument
tab on the right
side , or use the
button to do so.
Fig. 5 System Configuration
