COLD START
When the UPS is “Off” and there is no utility power, it is possible to power essential equipment connected to UPS for a
short period of time. Make sure that only the most necessary equipment is connected to the UPS at this time.
1.
Turn ON the UPS ON/OFF switch.
2.
Complete what you need to do with the powered equipment, before the UPS battery is fully discharged.
3.
Shut off the connected equipment.
4.
Turn OFF the UPS ON/OFF switch.
Technical specification
Model
400
500/600 700 800
1000 1200
Power factor
0.6
Load type
Personal computers and other PC peripheral devices
Mains voltage range
(140~290)±5Vac or (70-145)±5Vac
Mains frequency range
（
40~70
）
±1Hz
Output voltage range(Line mode)
110Vac/120Vac/220Vac/230Vac±10%(Sine wave)
Output frequency range(Line mode)
Synch with mains input
Output voltage range(battery mode)
110Vac/120Vac/220Vac/230Vac±5%(Square wave)
Output frequency range(battery mode)
(50/60)±1Hz(frequency self-adapt system)
Battery No-load protection
Auto protection. The UPS will automatically shut down after 2min
no load detected
Transfer time
≤10ms
Battery backup time*
>6Min(half load)
Battery protection
Auto protection. The UPS will automatically shut down when
battery voltage is low or high.
Battery charging time
8 hours to 90%
Short circuit protection
Auto protection. Output shuts off and the buzzer beeps
continuously
Overload protection
110 %< load percentage≤ 120%
，
buzzer beeps
；
load
percentage >120%
，
output shuts off
，
buzzer beeps continuously.
Operating temperature
0
℃
~40
℃
Storage temperature
-15
℃
~45
℃
Relative humidity
0%~90%(No condensation water)
Noise
≤35dB(1m from front panel)
Size/L×W×H(mm)
230*90
*145
291*90
*145
330*90*145 340x122x190
Net weight Kgs
4
4.5
4.5 5
5.2
8.4
9.4
Note: The specification listed above is subject to change without notice.
