manualshive.com logo in svg

Data-Tronix DT-IPTV-QAM-ASI-2H, Руководство пользователя и инструкция, Страница: 26 / 30

Поделиться
Скачать
Data-Tronix DT-IPTV-QAM-ASI-2H Скачать руководство пользователя страница 26

 

 

26 

DT-IPTV-QAM-ASI-2H |  Manual V1.0 | 01152019 

 

(3)

 

192.168.0.0 ~ 192.168.255.255 

  Subnet Mask 

–  Use the Scroll Up/Down button to select Subnet Mask. Press the OK 

button to enter the Subnet Mask menu. Use the Scroll Up/Down button to enter the Subnet 

Mask. Use the Scroll Up/Down menu to select the first number of the desired Subnet Mask 

then press the OK button to set. Repeat the process until the Subnet Mask is completed. 

Press the OK button to set. 

  Gateway Address – 

Use the Scroll Up/Down button to select Gateway Address. Press the 

OK button to enter the Gateway Address menu. Use the Scroll Up/Down button to enter 

the Gateway Address... Use the Scroll Up/Down menu to select the first number of the 

desired Gateway Address then press the OK button to set. Repeat the process until the 

Gateway Address is completed. Press the OK button to set. 



Back to IP Streaming Setup - 

Select Back to IP Streaming Setup to escape the Network - 

IP Streaming Sub Menu. 

Streaming Setup 

  Select IP Output 

– Use the Scroll Up/Down button to select Select IP Output. Press the 

OK button to enter the Select IP Output menu. Use the Scroll Up/Down button to select the 

desired IP Output, 1 or 2. Press the OK button to set. 

 

Enable Streaming 

– Use the Scroll UP/Down button to select Enable Streaming. Press the 

OK button to enter the Enable Streaming Menu. Select Enable or Disable then press the 

OK button to set. Factory Default: Enable. 

  Streaming Method 

– Use the Scroll Up/Down button to select Streaming Method. Press 

the OK button to enter the Streaming Method menu. Use the Scroll Up/Down button to 

select the Streaming  Method required. Select: RTP UNICAST, UDP UNICAST, RPT 

MULTICAST, or UDP MULTICAST. Press the OK button to set. Factory Default: RTP 

Multicast. 

  Destination IP – 

Use the Scroll Up/Down button to select

 

Destination IP (Address). Press 

the OK button to enter the Destination IP Address menu. Use the Scroll Up/Down button 

to set the

 

Destination IP Address. Note: By selecting Unicast in the Streaming Method 

Menu the default address begins at 192.168.1.20. Use the Scroll Up/Down button to set the 

Destination IP Address. Press the OK button to set.  Multicast begins at 224.1.1.1.

 

Press 

the OK button to set. 

 

 

Destination IP Address Range(s):

 

 

 

Unicast: 0.0.0.0 ~ 223.255.255.255 

 

 

Multicast: 224.0.0.0 ~ 239.255.255.255 

  Destination Port 

–  Use the Scroll Up/Down button to select DES Port Number 

(Destination Port Number). Press the OK button to enter the Destination Port Number 

menu. Use the Scroll Up/Down button to set. Press the OK button to set. Factory Default: 

10000. 

  Time To Live 

– Use the Scroll Up/Down button to select Time To Live menu. Press the 

OK button to enter the Time To Live menu. Use the Scroll Up/Down button to select TTL. 

Press the OK button to set. Default Settings: Unicast: 63. Multicast: 4. TTL Range: 1~ 255. 



Back to IP Streaming Setup

- Select Back to IP Streaming Setup To escape the Streaming 

- IP Streaming Sub Menu. 

Содержание DT-IPTV-QAM-ASI-2H































Отзывы:

Нет отзывов