Data-Tronix DT-IPTV-QAM-ASI-2H Скачать руководство пользователя страница 25

Страница: 25 / 30

DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019



VCN(MINOR CH NO) -

Use the Scroll Up/Down button to set VCN(MINOR CH NO).

Press the OK button to enter the VCN(MINOR CH NO) setup menu. Use the Scroll

Up/Down to select the desired VCN(MINOR CH NO) ranging from 1 to 999 then press

OK to set. Factory Default: 1.



VCN(ONE PART) -

Use the Scroll Up/Down button to set VCN(ONE PART). Press the

OK button to enter the VCN(ONE PART) setup menu. Use the Scroll Up/Down to select

the desired VCN(ONE PART) ranging from 1 to 999 then press OK to set. Factory Default:

101.



PROGRAM NO -

Use the Scroll Up/Down button to set PROGRAM NO. Press the OK

button to enter the PROGRAM NO setup menu. Use the Scroll Up/Down to select the

Program Num ranging from 1 to 999 then press OK to set. Factory Default: 1.



Short Channel Name

– Use the Scroll Up/Down button to select Short Channel Name.

Press the OK button to enter the Short Channel Name menu. Use the Scroll Up/Down

menu to select the first character of the desired Short Channel Name then press the OK

button to set. Repeat the process until the Short Channel Name is completed. If the

modulator has more than one video input scroll through the Advanced Menu for additional

Short channel name menus.

The Short Name can be 7 characters long

. Factory Default: MY-DVT1/MY-DVT2.



Long Channel Name

– Use the Scroll Up/Down button to select Long Channel Name.

Press the OK button to enter the Long Channel Name menu. Use the Scroll Up/Down

menu to select the first character of the desired Long Channel Name then press the OK

button to set. Repeat the process until the Long Channel Name is completed. If the

modulator has more than one video input scroll through the Advanced Menu for additional

Long channel name menus. Factory Default: ATSC-Digital-TV1/ATSC-DIGITAL-TV2.

The Long Channel Name can be 16 characters long.



Source ID

Use the Scroll Up/Down button to set Source ID. Press the OK button to enter

the Source ID menu. Use the Scroll Up/Down to set the Source ID. Range: 1 to 65535.

Press OK to set. Factory Default: 101.



Back to Encoder

- Select Back to Encoder to escape the PSIP Setup Menu.

IP Streaming Setup

Network Setup



DHCP

– Use the Scroll Up/Down button to select DHCP. Press the OK button to enter the

DHCP menu. Use the Scroll Up/Down button to Enable/Disable. Press the OK button to set.



IP Address

– Use the Scroll Up/Down button to select IP Address. Press the OK button to

enter the IP Address menu. Use the Scroll Up/Down button to enter the IP address. Use the

Scroll Up/Down menu to select the first number of the desired IP Address then press the

OK button to set. Repeat the process until the IP Address is completed. Press the OK

button to set.

Note:

If DHCP is enabled you will not be able to set an IP address. Select

DHCP disabled if Static IP Address required.

IP Address Range(s):

(1)

10.0.0.0 ~ 10.255..255.255

(2)

172.16.0.0 ~ 172.31.255.255

Содержание DT-IPTV-QAM-ASI-2H































Результаты поиска

Содержание DT-IPTV-QAM-ASI-2H

Отзывы:

Похожие инструкции для DT-IPTV-QAM-ASI-2H

Бренды по названию

Популярные бренды

Data-Tronix DT-IPTV-QAM-ASI-2H, Руководство пользователя и инструкция

Результаты поиска

Содержание DT-IPTV-QAM-ASI-2H

Отзывы:

Похожие инструкции для DT-IPTV-QAM-ASI-2H

Бренды по названию

Популярные бренды