background image

DATATRONIX 1-Year Limited Warranty 

DATATRONIX.  (the  "Company")  warrants  to  the  Original  Purchaser  that  the  item  purchased  is 

free from defects in workmanship or material under normal use. This warranty starts on the date of 

shipment of the hardware to the Original Purchaser. 

During  the  warranty  period,  the  Company  agrees  to  repair  or  replace, at  its  sole  option,  without 

charge to Original Purchaser, any defective component. To obtain service, the Original Purchaser 

must return the item to the Company properly packaged for shipping. All defective products must 

be returned to  the Company within thirty  (30) days of  failure. Products must  be returned with  a 

description of the failure and Return Merchandise Authorization (RMA) number supplied by the 

Company.  To  receive  a  RMA  number  and  a  return  shipping  address  on  where  to  deliver  the 

hardware,  call  610-429-1821.  The  shipping,  and  insurance  charges  incurred  in  shipping  to  the 

Company will be paid by Original Purchaser, and all risk for the hardware shall remain with the 

Original Purchaser  until  such  time  as  Company  takes  receipt  of  the hardware. Upon  receipt,  the 

Company will promptly  repair or replace the defective unit, and then return said unit to Original 

Purchaser, shipping prepaid. The Company may use reconditioned or like-new parts or units, at its 

sole  option,  when  repairing  any  hardware.  Repaired  products  shall  carry  the  same  amount  of 

outstanding warranty as from original purchase. Any claim under the warranty must include dated 

proof  of  purchase  or  invoice.  In  any  event,  the  Company's  liability  for  defective  hardware  is 

limited to repairing or replacing the hardware. 

This warranty is contingent upon proper use of the hardware by Original Purchaser and does not 

cover: if damage is due to Acts of God (including fire, flood, earthquake, storm, hurricane or other 

natural disaster), accident, unusual physical, electrical, or electromechanical stress, modifications, 

neglect; misuse, operation with media not approved by the Company, tampering with or altering of 

the  hardware,  war,  invasion,  act  of  foreign  enemies,  hostilities  (regardless  of  whether  war  is 

declared), civil war, rebellion, revolution, insurrection, military or usurped power or confiscation, 

terrorist activities, nationalization, government sanction, blockage, embargo, labor dispute, strike, 

lockout  or  interruption  or  failure  of  electricity,  air  conditioning,  or  humidity  control,  internet, 

network,    or telephone service 

The  warranties  given  herein,  together  with  any  implied  warranties  covering  the  hardware, 

including  any  warranties  of  merchantability  or  fitness  for  a  particular  purpose,  are  limited  in 

duration to two years from the date of shipment to the Original Purchaser. Jurisdictions vary with 

regard to the enforceability of warranty limitations, and you should check the laws of your local 

jurisdiction to find out whether the above limitation applies to you. 

The  Company  shall  not  be  liable  to  your  for  loss  of  data,  loss  of  profits,  lost  savings,  special, 

incidental,  consequential,  indirect,  or  other  similar  damages  arising  from  breach  of  warranty, 

breach  of  contract,  negligence,  or  other  legal  action  even  if  the  Company  or  its  agent  has  been 

advised of the possibility of such damages, or for any claim brought against your by another party. 

Jurisdictions vary with regard to the enforceability of provisions excluding or limiting liability for 

incidental or consequential damages. You should check the laws of your local jurisdiction to find 

out whether the above exclusion applies to you. 

This warranty allocates risks of product failure between Original Purchaser and the Company. The 

Company's  hardware  pricing  reflects  this  allocation  of  risk  and  the  limitations  of  liability 

contained in this warranty. The warranty set forth above is in lieu of all other express warranties, 

Содержание DT-05PTWR300MB



























Отзывы: