background image

TABLE OF CONTENTS 

 

Chapter l. Introduction

                                                           

1.1 0verview                                                                                 

1.2 Features                                                                             

1.3 Environment                                                                       

1.4 Package contents                                                                 

1.5 System Requirements                                                       

Chapter 2. Hardware Installation

 

2.1 Interface description                                                       

2.2 Hardware connection guide                                       

Chapter3. Setup guide                                                         

3.1 TCP/IP Configuration         

3.1.1 Network Configuration for DHCP                                             

3.2 Quick setup of PPPoE for ADSL sharing               

3.3 0peration Modes                                                         

3.4 Internet Settings                                                             

3.4.1 WAN settings                                           

3.4.3 DHCP Clients list                                                                       

3.5 Wireless Settings                                                 

3.5.1 Basic wireless settings                                     

3.5.2 Advanced wireless settings                                               

3.5.3 Wireless Access Security setup                                             

3.5.4 WPS setting(for applicable units)   

3.5.5 Wireless Station list                                                         

3.6.1 MAC/IP/Port Filtering                                                               

3.6.2 Port Forwarding(Virtual Server)   

3.6.4 System Security                                                                                     

3.6.5 Content Filtering                                                 

3.7    Administration management                                                   

3.7.1 Language, Password, NTP settings                   

3.7.2 Firmware Upgrade                                                     

3.7.3 Settings Management                                                     

3.7.4 Status                                                                     

3.7.5 Statistics                                                                         

Chapter 4.   

4.1    FAQ’s 

4.2    Warranty 

4.3    Troubleshooting 

Содержание DT-05PTWR300MB



























Отзывы: