7. Connect the WAN port of this Router with the LAN port of the ADSL modem, then
reboot the Router and ADSL modem. You can share the internet connection.
For the settings of the ADSL modem please refer to its user's guide.
3.3 0peration Mode
Please refer to fig 4 in 3.2.3, you can set this device to Bridge or Gateway
mode.
1 . Bridge mode: All ethernet and wireless interfaces are bridged into a single
bridge Interface. WAN settings do not need to be set in the Internet Settings menu.
2. Gateway mode: The first ethernet port is treated as the WAN port. The other
ethernet ports and the wireless interface are bridged together and are treated
as LAN ports. WAN settings must be set in the Internet Settings menu.
3. After you have selected a mode, wait for the device to reboot, then refresh
the setup WEB page.
Note: In Gateway mode, If you want to let PCS aquire lP addresses automatically,
you must Enable the NAT.
3.4 Internet Settings
3.4.1 WAN settings
This device provides 5 WAN connection types:
STATIC (fixed IP) DHCP (Auto config) PPPoE(ADSL) L2TP PPTP.
Select the WAN connection type required by your ISP(lnternet Service Provider),
then input the parameters into corresponding fields, click Apply.
3.4.1.1 STATIC (fixed lP)
If your ISP assigns you a fixed IP address, Select STATIC(fixed lP) as figure. 8:
