manualshive.com logo in svg

Data Translation DT9871, Руководство пользователя

Поделиться
Скачать
Data Translation DT9871 Скачать руководство пользователя страница 2

Copyright Page

Trademark and Copyright Information

Measurement Computing Corporation, InstaCal, Universal Library, and the Measurement 
Computing logo are either trademarks or registered trademarks of Measurement Computing 
Corporation. Refer to the Copyrights & Trademarks section on 

mccdaq.com/legal

 for more 

information about Measurement Computing trademarks.

Other product and company names mentioned herein are trademarks or trade names of their 
respective companies.

© 2018 Measurement Computing Corporation. All rights reserved. No part of this publication 
may be reproduced, stored in a retrieval system, or transmitted, in any form by any means, 
electronic, mechanical, by photocopying, recording, or otherwise without the prior written 
permission of Measurement Computing Corporation.

Notice

Measurement Computing Corporation does not authorize any Measurement Computing 
Corporation product for use in life support systems and/or devices without prior written consent 
from Measurement Computing Corporation. Life support devices/systems are devices or systems 
that, a) are intended for surgical implantation into the body, or b) support or sustain life and whose 
failure to perform can be reasonably expected to result in injury. Measurement Computing 
Corporation products are not designed with the components required, and are not subject to the 
testing required to ensure a level of reliability suitable for the treatment and diagnosis of people.

Содержание DT9871







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды