Data Translation DT9812 Series Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 124

background image

Overview

15

Supported Software

The following software is available for use with the DT9812, DT9813, and DT9814 Series
modules, and is provided on the OMNI CD:

•

Device Driver



– The DT9812, DT9813, or DT9814 Series Device Driver allows you to use

these modules with any of the supported software packages or utilities. Refer to

for more information on configuring the device driver.

•

Quick DataAcq application

–



The Quick DataAcq application provides a quick way to get

up and running using a DT9812, DT9813, or DT9814 Series module. Using this
application, you can verify key features of the modules, display data on the screen, and
save data to disk. Refer to

for more information on using the Quick DataAcq

application.

•

The quickDAQ application –

An evaluation version of this .NET application is included

on the Data Acquisition OMNI CD. quickDAQ lets you acquire analog data from all
devices supported by DT-Open Layers for .NET software at high speed, plot it during
acquisition, analyze it, and/or save it to disk for later analysis.

•

DT-Open Layers for .NET Class Library

–

Use this class library if you want to use Visual

C# or Visual Basic for .NET to develop your own application software for a DT9812,
DT9813, or DT9814 Series module using Visual Studio 2003 or Visual Studio 2005; the class
library complies with the DT-Open Layers standard.

•

DataAcq SDK

–

Use the Data Acq SDK if you want to use Visual Studio 6.0 and Microsoft

C or C++ to develop your own application software for a DT9812, DT9813, or DT9814
Series module using Windows XP, Windows Vista, or Windows 7; the DataAcq SDK
complies with the DT-Open Layers standard.

•

DTx-EZ

– Use this optional software package if you want to use ActiveX controls to access

the capabilities of your modules using Microsoft Visual Basic or Visual C++; DTx-EZ
complies with the DT-Open Layers

standard.

•

DAQ Adaptor for MATLAB

– Data Translation’s DAQ Adaptor provides an interface

between the MATLAB Data Acquisition (DAQ) subsystem from The MathWorks and Data
Translation’s DT-Open Layers architecture.

•

Measure Foundry

– An evaluation version of this software is included or provided via a

link on the OMNI CD. DT Measure Foundry is drag-and-drop test and measurement
application builder designed to give you top performance with ease-of-use development.
Order the full development version of this software package to develop your own
application using real hardware.

•

LV-Link

– An evaluation version of LV-Link is included on the OMNI CD. Use this

software package if you want to use the LabVIEW graphical programming language to
access the capabilities of your modules.

«
...
13
14
15
16
17
...
»

Содержание DT9812 Series





























































































































Отзывы:

Нет отзывов

Похожие инструкции для DT9812 Series

Бренд: TANDBERG Страницы: 53

Бренд: jenway Страницы: 20

Бренд: Eaton Страницы: 87

Бренд: Eaton Страницы: 16

Бренд: FCI Страницы: 44

Бренд: FCI Страницы: 36

Бренд: FCI Страницы: 26

Бренд: LATNEX Страницы: 55

Бренд: Laser Technology Страницы: 11

Бренд: Laser Technology Страницы: 62

Бренд: WalkLAB Страницы: 16

ProcessMaster FEP630 series

Бренд: ABB Страницы: 92

Бренд: National Instruments Страницы: 15

SoundTrack LxT N/Forcer

Бренд: Larson Davis Страницы: 12

Бренд: Mark-10 Страницы: 26

Бренд: OHAUS Страницы: 84

WARREN ELLIS SIGNATURE TENOR BARITONE

Бренд: Eastwood Guitars Страницы: 4

Бренд: Fluke Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды