Data Translation DT300 Series, Руководство по началу работы

Страница: 17 / 98

Preparing to Use a DT300 Series Board
7
2
2
2
2
2
2
2
2
2
Unpacking
Open the shipping box and remove the wrapped DT300 Series board.
Verify that the following items are present:
• DT300 Series data acquisition board, and
• Data Acquisition OMNI CD.
If an item is missing or damaged, contact Data Translation. If you are
in the United States, call the Customer Service Department at (508)
481-3700. An application engineer will guide you through the
appropriate steps for replacing missing or damaged items. If you are
located outside the United States, call your local distributor, listed in
your Data Translation Product Handbook.
Once you have unpacked your board, check the system requirements,
as described in the next section.
CAUTION:
Keep the board in its protective antistatic bag until you are ready to
install it; this minimizes the likelihood of electrostatic damage.