Song Selection
Press a 3 or 4 digit song selection number. Any song selection number can be entered from
"000" to "999" for 3-digit mode or "0000" to "9999" for 4-digit mode. If in coin operation mode
and the selected song number was not found, the used credit will be added back.
Select Starting Autoplay Folder (Playlist)
The JCU does not support album plays but you can select the folder that the "autoplay feature"
plays from. Folders are numbered 00 through 99. The wallbox title pages display folders 01
and 02. All other folders are available for autoplay.
The "autoplay end folder" must be programmed to the highest folder number you will be using
and autoplay control from the remote must be enabled (service mode parameter "6" = 0).
To change the autoplay folder: Press digits 0 to 9 for 3-digit mode or 00 to 99 for 4-digit mode
then press ENTER on the remote. If successful, you will see two dashes displayed after the
entered digits.
If a song is currently playing, it will be cancelled and the first song from the selected folder will
start to play immediately.
Using the Remote to Add a Credit
To add a credit, the autoplay control from the remote must be enabled (service mode
parameter "6" = 0). Press "8" then the "CHANNEL UP" button to add the credit.
Numeric buttons 0 through 9
Same as wallbox NUMBERS
CHAN UP =
Always autoplay
CHAN DN =
Timed autoplay
VOL UP =
Increase volume
VOL DN =
Decrease volume
MUTE
Toggles play/pause
ON-OFF
Cancels current song play
ENTER
Autoplay folder changing
TV-VCR
or
ANTENNA
Same as wallbox RESET
WIRELESS REMOTE WITH SONG SELECTION CAPABILITY
Programming the Remote
1) Press and hold "Code Search" until LED stays on
2) Press "TV"
3) Press "0" "3" "9"
