Data General AViiON Series, Клиентская документация

Страница: 132 / 210

Connecting External Devices to VME Option Boards
4-32
014–001867
Slide clip
Cable connector (male)
Slide clip mounts
Connector pins
1–15
Drop cable (side view)
Figure 4–38 Aligning Slide Clip Mounts with a LAN Connector
4. Push the edge of the slide clip into position, so the small mount slot surrounds
its cable connector mount. Figure 4–39 illustrates how to secure a slide clip
connection.
Mount slot
(large)
Mount slot
(small)
VLCi board
air dam
Cable connector mount
Cable connector mount
Figure 4–39 Securing a LAN Drop Cable to a VLCi Connector
If you haven’t already connected the remote end of the cable to your transceiver, do
so now. Refer to the device-specific documentation for your transceiver, if necessary.
When you finish connecting all external devices to your system, refer to your
starting manual for instructions on powering up your system. You should then refer
to your operating system documentation for instructions on what to do after booting
or rebooting your system hardware.