Data General AViiON 4600 Series, Клиентская документация

Страница: 95 / 266

Using the SCM Configuration Menus
5-11
014–002091
Change character size
1 8 bit, no parity
2 7 bit, even parity
3 7 bit, odd parity
4 7 bit, mark parity
5 7 bit, no parity
6 Return to previous screen
Current character size is [8 bit, no parity]
Enter choice(s)–>
Type the item number of the character size you want and press New Line. You return
to the Change Console Parameters menu. The character size you selected will be the
default for your system console port the next time you power up or reset the system.
Changing the System Console Mode
While in the View or Change System Configuration menu, type and press New Line
to select item 2 Change console parameters." The system displays the current value
in brackets next to item 3 on the Change Console Parameters menu. Use item 3,
Change async console mode" to change the default character code setting for the
system console port. The default character mode is ANSI. The alternate is DG mode.
Refer to the documentation that came with the terminal for information about
supported character modes.
NOTE: Item 3 applies only if you are usingan asynchronous terminal as system
console; this parameter does not apply to a graphics monitor.
Change console parameters
1 Change baud rate [9600]
2 Change character size [8 bit, no parity]
3 Change asynch console mode [ANSI]
4 Change flow control [Enabled]
5 Change console language [US English]
6 Change screen saver timeout [15 minutes]
7 Return to previous screen
Enter choice(s) –>
3 Change asynch console mode [ANSI]
CAUTION: The console character code setmustbe ANSI if you use the DG/UX
operating system.