Data General AViiON 4600 Series, Клиентская документация

Страница: 42 / 266

Setting Up Your Computer System
2-2
014–002091
To connect an asynchronous terminal to the system console port of an AViiON 530 or
4600 series system, use the 9- to 25-pin asynchronous adapter cable (female to
female), part number 005-38420, and one of the following cables:
Part Number Model Number Length (ft.)
005-34256 15340E010 10
005-34990 15340E015 15
005-34991 15340E025 25
To connect a terminal to the system console connector on the computer-unit,
complete the following steps.
NOTE: You will need a small flat-head screwdriver to complete these steps.
Refer to Figure 2Ć1 as you perform the first three steps.
1.
Align the holes in the 9-pin end of the asynchronous adapter cable to the pins in
the connector labeled RS232 A" on the computer unit rear panel.
NOTE: Do not use serial ports B or C for the system console.
2. Secure the cable to the connector by tightening the two cable screws with a small
flat-head screwdriver.
3. Secure the other (25-pin) end of the adapter cable into one end of the terminal
cable .
RS232
-A-
Cable screw
Cable screw
Computer Unit
Rear Panel
Attach adapter cable
to computer
Attach device cable to adapter cable
A
Figure 2-1 Connecting the System Console