Data General AViiON 4600 Series, Клиентская документация

Страница: 91 / 266

Using the SCM Configuration Menus
5-7
014–002091
5. Using a Danish keyboard , boot the DG/UX system from the system disk.
SCM>
b sd)ncsc)=,0=rootAE–dgux.file +1
6. Using a Norwegian keyboard , boot the DG/UX system from the system disk.
SCM>
b sd)ncsc)=,0=rootO–dgux.file +1
7. Boot AViiON System Diagnostics (the program file located in the directory
called on the logical disk ) from the default system disk.
SCM>
b sd(ncsc(),0)usr:/stand/diags
8. Boot the executable file called in the root directory on the second SCSI
disk (SCSI ID 1).
SCM>
b sd(ncsc(),1)root:/bootfile
9. Boot from the first host that responds on the Ethernet LAN (your computer is
connected to only one network).
SCM>
b dgen()
10. Boot from the host at Internet address 128.111.5.6 on an alternate Ethernet LAN
(you are connected to two different LANs, managed by an integrated and a VME
Ethernet controller).
SCM>
b hken()128.111.5.6:
Using the Change Default System Boot Path Menu
To view, initialize, change, and optionally boot the default boot device, follow these
steps:
1.
While in the View or Change System Configuration menu, type
1
and press New
Line to select item 1, Change default system boot path."
2. The system displays the current system boot path [inside square brackets] with a
prompt asking if you want to change the current default boot path, as follows:
System boot path = [ ]
Do you want to modify the default boot path? Y/[N]
NOTE: The boot path is not initialized when the brackets are empty.
To keep the existing boot path, press New Line at the prompt, and then skip to
step 5.
Do you want to modify the default boot path? [N]
To set or change the system boot path, type and press New Line at the prompt.
Do you want to modify the default boot path? [N]
y
The system displays the following prompt.
Enter new system boot path –>