Data Domain DD580, Руководство по аппаратному обеспечению системы

Страница: 55 / 74

DD580, DD565, DD530, and DD510 Systems 55
Hardware Overview
The DD580, DD580g, and DD565 systems support up to two of the following optional Ethernet
PCIe NICs. You can have up to 2 NICs or you can have one NIC and one virtual tape library (VTL)
host bus adapter (HBA), with the Ethernet NIC in slot 5 and the VTL HBA in slot 6. Upgrade to
DD OS 4.4.x or later before adding a second card.
•
Dual port copper 1Gb (1000 BASE-T) Ethernet PCIe NIC with RJ45 connectors
•
Dual port optical 1Gb (1000 BASE-SX) multi-mode fiber Ethernet PCIe NIC with LC
connectors
•
Dual port copper 10 Gb (10GBASE-CX4) Ethernet PCIe NIC with CX4 connectors (requires
DD OS 4.5 or later)
•
Single port optical 10 Gb (10GBASE-SX) multi-mode fiber (850 nm) Ethernet PCIe NIC with
an LC connector (requires DD OS 4.6 or later)
The DD530 and DD510 systems supports up to one of the following optional Ethernet PCIe
NICs.in slot 5.
•
Dual port copper 1Gb (1000 BASE-T) Ethernet PCIe NIC with RJ45 connectors
•
Dual port optical 1Gb (1000 BASE-SX) multi-mode fiber Ethernet PCIe NIC with LC
connectors
See the “Network Management” chapter in the Data Domain Operating System User Guide . for the
rules for configuring the Ethernet interfaces for failover and aggregation.
The DD580, DD580g, and DD565 systems support up to two optional dual port 4 Gbps VTL Fibre
Channel PCIe HBAs. You can have up to 2 VTL HBAs or you can have one NIC and one VTL
HBA, with the Ethernet NIC in slot 5 and the VTL HBA in slot 6. Upgrade to DD OS 4.4.x or later
before adding a second card
The DD530 and DD510 systems support up to one optional dual port 4 Gbps VTL Fibre Channel
PCIe HBA in slot 6.
The VTL HBAs allow manual failover from one port to another on one HBA or to ports on the
other HBA in release DD OS 4.4 or later. To set up failover, use the Data Domain system
vtl
command to configure all VTL ports with some as secondary. The secondary ports are available for
manual failover using the
vtl group use
command. Failover requires DD OS 4.4 or later.