dCS
Vivaldi One Digital Playback System User Manual
Software Issue 1.0x
September 2017
Vivaldi One Manual v1_0x
Page 50
English version
M
AINTENANCE AND
S
UPPORT
Service and Maintenance
dCS
audio products are designed not to need regular maintenance, and contain no user serviceable
parts apart from the mains fuse. If your unit is damaged in any way, please contact your dealer.
Replacing a Blown Mains Fuse
There is a mains fuse below the power inlet, accessible from the outside of the unit.
If the fuse blows, it
may be changed by the user. The current consumption of the unit is very low, so it only blows if power
surges occur, or there is a fault in the unit. Usually power surges cause no other damage, but if the fuse
blows repeatedly on replacement, some other damage will have been done - contact your dealer to
arrange repair.
Fuse type: 20 x 5mm T 1A L fuse
!
If the fuse should fail, it is essential that it is replaced with one of the same type and rating.
Failure to do so could result in damage to the unit, risk of fire or electric shock and will
invalidate the warranty. Fuse failure is rare!
Referring to the diagram below, remove the power cable, use your fingernails to catch the two tabs of
the fuse holder (A), push them together to release the clips and pull the fuse holder out. Pull out the
blown fuse from the lower position (B) and discard it. Either move the Spare Fuse (C) to the lower
position or fit one of the fuses from the manual pack. Orient the fuse holder as shown (D) and push the
holder back into the power inlet so that it clicks home.
A B D
C