DASS 3.0i LV (DSP-123i-ODS)
User manual
Copyright © DASS Tech Co., Ltd
- 45 -
including:
Normal
------Long press the button
1.Enter Setting
2.Event List
3.SystemInfo
4.Display Time
5.Software Update
(A)
“
Enter Setting
”
Interface as below:
1.Enter Setting
------Long press the button
1.Set time
12.Set Safety Voltage
2.Clear Energy
13.Set Safety Frequency
3.Clear Events
14.Insulation Resistance
4.Set Country
15.Set Reactive
5.On-Off Control
16.Set Power Derate
6.Enable Set Country
17.Reflux Power
7.Set Energy
18.MPPT Scan
8.Set Address
19.Logic Interface
9.Set Input mode
20.Set Power Ratio
10.Set Language
11.Set Start Parameter
Long press the button to Enter the main interface of "1.Enter Setting" and long
press to enter the setting menu. You can select the content you want to set by
short pressing the button.
Note1: Some settings need to enter the password (the default password is
0001), when entering the password, short press to change the number, long press
to confirm the current number, and long press after entering the correct password.If
"password error, try again" appears, you will need to re-enter the correct password.
1. Set Time
