V1.0
24
For quality assurance at the factory, it is necessary to run
various laminating tests on the laminator. A value of tens
or more for Card Count is normal during manufacturing of
your laminator.
Laminate Parm Setup
Laminate Mode
：
Current laminate mode of the
laminator. 8 different modes
available. Mode 1 \ Mode 2 \ Mode
3 \ Mode 4 \ Mode 5 \ Mode 6 \
Mode 7 \ Mode 8
Heater Temp
：
The temperature of the heating roller
when laminating.
(Range: 100~180
℃
, Unit of adjustment
：
5
℃
)
Laminate Speed
：
The speed at which the card passes
through the heating roller when
laminating.
(Range
：
5~35mm/s, Unit of adjustment :1mm/s)
Film Feed Speed
：
Movement speed of Laminate after
Laminate has been applied.
(Range
：
9~35mm/s , Unit of adjustment
：
1mm/s)
Film Laminate Pos
：
After Black Mark detection,
distance of Laminate is to be
positioned.
(Range-80.0~80.0mm, Unit of adjustment
：
0.1mm)
Card Laminate Pos
：
Beginning position of Laminate on
the Card when applied.
(Range
：
-10.0~10.0mm, Unit of adjustment
：
0.1mm)
Laminate End Pos
：
The distance from which the film
continues to feed after laminating.
(Range
：
0~80.0mm, Unit of adjustment
：
0.1mm)
BlackMark Mode
：
Used to detect the Black Mark on
the Laminate.
Option
：
Disable \ Enable
Содержание DC-5100
