Darwin HULKAIO, Руководство пользователя

Страница: 17 / 20

RC LED Status Receiver Mode
Green Light Stays On Paired
Green Light Fast Flashing In Pairing Mode
Green Light Slow Flashing Not Paired
Connect to computer by USB-C cable, open
the Betafight software and click “connect” button,
enter the receiver configure page, and click "Bind
Receiver" button. At the same time, the green
receiver led indicator (I.E. “RC LED”) will change
from slow flashing to fast flashing, indicating that
the receiver has entered pairing mode.
Reminder: after the pairing is successful, the
led indicator will change from fast flashing to slow
flashing, indicating that the pairing is successful,
after a while, the indicator light will turn steady on,
indicating that the connection is successful. After
1st pairing, the receiver will remember the pairing
info. In the future, every time the drone is powered
on, it will automatically connect & no need to rebind.
Betaflight 4.3 firmware only supports
ELRS_V2.x TX Module.
PAIRING