Darwin HULKAIO, Руководство пользователя

Страница: 18 / 20

Phenomenon
Possible Reason
Troubleshooting
Methods
Solutions
No response after
power on
power battery is
dead
after replacing the new
battery, drone can be
started normally
replace battery
The motor vibrates
and cannot rotate
normally
1. the motor is
broken
2. the motor wire is
not welded firmly
1.turn the motor by hand,
you can obviously feel
stuck
2. re-solder the motor
wires
1.replace the motor
2.re-solder the motor
wires
Unable to arm
1. the unlock
channel is not set
(the receiver is
already paired)
2. the radio and
receiver are not
bound
1. Betaflight software,
enter mode view channel
2. Betaflight software,
enter receiver page to
check if the joystick
movement has response
in Betaflight
1. set arm channel
2. bind receiver
Yaw after the drone
takes off
when calibrating the
gyroscope, the
aircraft is not level
or the calibration
has not been
completed
enter Betaflight software,
the drone is not level
calibrate the
gyroscope
Video transmitter
has OSD, but no
image
1. damaged camera
2. the camera line is
connected
1. replace a new camrea
2. carefully check the
line connecting the
1. replace camrea
2. check the line
sequence for
TROUBLE SHOOTING