Darwin Fitness Walking Pad, Инструкция по сборке и эксплуатации

Страница: 20 / 36

WP
20
5 TROUBLESHOOTING, CARE AND MAINTENANCE
5.1 General Instructions
⚠ WARNING
+ Do not make any improper changes to the equipment.
⚠
CAUTION
+ Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the
contract partner. The equipment must not be used until it has been repaired. If necessary,
use only original spare parts.
࣑
ATTENTION
+ In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians.
5.2 Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Error Cause Solution
Walking mat is
skewed
Walking mat is not centered
Re-center the walking mat according to
the instructions
Walking mat slips/
stops
Walking mat is not correctly
tensioned / Not sufficiently
lubricated
Check the tension / lubrication
according to the instructions
Grinding sound
Walking mat is scraping
against the frame because it
is not centered
Re-center the walking mat according to
the instructions
Display is showing
nothing
Check power cord and plug
Check that the power switch is in the on
position