34
Maintenance Menu
1
2
3
4
5
6
7
8
9
10
11
12
13
Reaction Test for Membrane Switch：
You can perform reaction test by pressing at
each area on the target.
If the positions are displayed on the touch
screen monitor when you press the target, the
devices and wiring of the input system are
normal.
Conduct this test periodically to check that the
equipment is functioning properly.
The area from 1 to 20 on the target are divided
into S (SINGLE-IN / SINGLE-OUT), D (DOUBLE),
and T (TRIPLE).
5 - 1 - 4 Fig. 03
■
5 - 1 - 5 Light
・Side LED - Refer to "5-1-5-1 Side LED".
・Standing Navi LED - Refer to "5-1-5-2 Standing Navi LED".
・Card reader LED - Refer to "5-1-5-3 Card Reader LED".
・Number LED - Refer to "5-1-5-4 Number LED".
・Initialize all LED Brightness Settings - Refer to "5-1-5-5 Initialize all LED Brightness
Settings".
5 - 1 - 5 Fig. 01
