DARKROOM AUTOMATION F-STOP, Инструкция по эксплуатации

Страница: 23 / 26

APPENDIX A: TIMER SETUP
Enter setup mode by holding the menu key down. Hold the menu key down in
setup mode to return to timer mode. The timer may return to F-Stop or Seconds
timing depending on the setting of the timer type
ti.F
or
ti.S
.
Pressing the menu key takes you from one setup item to the next. The arrow keys
choose between the setup options.
All settings are remembered with power off.
Timer type
ti.F
F-Stop timing
ti.S
Seconds timing
Lamp delay
Ld.y
Enable lamp delay
Ld.n
Disable lamp delay
If lamp delay is enabled the next menu item will set the delay time in seconds.
t.05
Sets the lamp delay from 0.00 to 0.99 seconds
When making a print the display will show
Ld-
during the delay time.
Test Strip type
tE.P
Progressive test strips
tE.i
Independent test prints
Split Grade printing
SG.i
Independent H and L channels
SG.L
Linked channels for exposure and contrast control
Memory enable
mE.y
Enable memory mode
mE.n
Disable memory mode - you may want to do this if you never use memory
mode
21