DARKROOM AUTOMATION F-STOP, Инструкция по эксплуатации

Страница: 16 / 26

Exposure value and type are set and viewed with the menu key:
Set the exposure value by pressing the menu key when a step is displayed - the
display changes from
1E2.
to
E2.0
.
Step type Exposure
E 2.0
Set the exposure in stops with the arrow keys. Return to the step display by
pressing the menu key again.
Set the exposure type by holding the menu key down for one second when the
value display
E2.0
, described above, is showing. The LED changes from
E2.0
to
1 E
.
Step # Step type
1 E
Select the new type with the arrow keys. Press the menu key to return to the value
display to enter the exposure for the new exposure.
Step 1 is always a base exposure:
E
,
H
or
L
.
Note: holding the menu key down when the step display
1E2.
is showing will exit
memory mode.
Program a blank step
2--
by pressing the menu key. The timer will go immediately
to setting the exposure type
2 -
. Select the exposure type
2 b
and press the
menu key to go to the value display
b0.1
and set the exposure in stops
b1.4
with
the arrow keys. Press the menu key one more time to return to the step display
2b1.
Note how the value of
1.4
truncates to
1.
: only the display is truncated,
the exposure remains as a 1.4 stop burn and the full value
b1.4
is shown by
pressing the menu key.
Steps are inserted and deleted from the step display:
Insert, delete and clear by first going to an exposure type display. Starting at the
step display
2b1.
tap the menu key and then hold it down for one second so the
display shows the step type
2 b
, then:
Delete a step by pressing the up arrow until the display shows
dEL.
. Pressing the
menu key will then delete the current step. All the following steps in the memory
bank will fall down a notch and a blank step will be inserted at position 20 at the end
of the bank. Step 1 can not be deleted and can only have it’s type and value
changed.
14