DARKLAB HOVER, Руководство пользователя

Страница: 10 / 11

10
USER MANUAL
VOLTAGE PARAMETERS
While voltage is a parameter that will vary from artist to artist, the Hover has been tested
to operate at a minimum voltage of around 2 Volts with a maximum voltage of 17 Volts.
Depending on the type of needle configuration or brand you use, feel free to adjust the voltage to
obtain the desired performance. NOTE: Some machines require a minimum voltage to operate
correctly, please check your machine manufacturers requirements.
WARRANTY
Darklab warrants that the device will perform efficiently when used as intended. Should this product
prove to be defective due to manufacturing issues, Darklab will repair/replace the device - free of
charge. This warranty will be void if the device shows signs of having been tampered, disassembled,
handled roughly, dropped, overexposed to moisture or damage to sensors/screen resulting in
compromised functionality. Avoid scratches to screen. Always use clear barrier film while in operation.
HANDY TIPS
The following tips will help you get the most out of your Hover and avoid potential issues:
• Do not exceed the suggested voltage.
• Only use approved power adapters, failure to do so can void your warranty.
• Use only quality cables. A good connection will ensure consistent performance.
• Keep screen safe using Hover approved barrier film. Typical adhesive could interfere with sensors.
• Use only FDA-approved cold sterilization solutions for disinfection. Avoid scratching sensor windows.
• NOT AUTOCLAVABLE.
ADITIONAL INFORMATION