Darkglass Electronics Microtubes B1K, Руководство пользователя

Страница: 4 / 4

Disclaimer
In the interest of continuous improvement,
specifications are subject to change without
notice. If you have any questions, please don’t
hesitate to contact us at www.darkglass.com
The manufacturer claims that the above product
fulfills the requirements as set by EN55013,
EN55020, EN60555-2, EN60555-3, RoHS,
WEEE.
EMC / EMI
This equipment has been tested and found to
comply with the limits for a Class B Digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
There is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the
equipment and receiver.
· Connect the equipment to an outlet on a
circuit different from that to which the receiver
is connected.
· Consult the dealer or an experienced radio/TV
technician for help
Darkglass Electronics
Helsinki, Finland.
www.darkglass.com