I N S T A L L A T I O N M A N U A L
H 5 0 0 0 H Y B R I D I N V E R T E R
R e v . 2
© 2 0 1 7 D a r f o n E l e c t r o n i c s C o r p .
5
| P a g e
MOUNTING THE INVERTER
Preparation
Before installation, inspect the unit make sure nothing inside the package is damaged. You should have received the
following items in the package: H5000 hybrid inverter and Installation Manual.
The following considerations must be taken into account before selecting where to install.
The unit cannot be mounted on flammable construction materials.
The unit must be mounted to a solid surface.
The unit should be installed at eye level in order to easily read the LCD display at any time.
Allow 20cm (8in) of clearance to the sides and 50cm (20in) to the top and bottom of the unit for proper air circulation
to dissipate heat.
The ambient temperature must be between 0 and 50°C and relative humidity must be between 5 and 85% to ensure
optimal operation. Do not operate where the temperature and humidity are beyond the specified limits.
The unit has a Pollution Degree rating of PD2. The unit must be mounted in a protected area that is dry, free of
excessive dust and has adequate air flow.
The unit was designed with an IP20 protection rating and is for indoor applications only.
Installing the Inverter onto the Wall
CAUTION.
This inverter is heavy (71lb). Be carefully while lifting and mounting the unit.
Step 1. Install the bracket onto the each side of
inverter and secure it with two screws on
each side.
Step 2. Remove the eleven screws on the bottom
of the inverter and pull the bottom cover
off.
