I N S T A L L A T I O N M A N U A L
H 5 0 0 0 H Y B R I D I N V E R T E R
R e v . 2
© 2 0 1 7 D a r f o n E l e c t r o n i c s C o r p .
1 1
| P a g e
FINAL INSTALLATION STEPS
The wiring for all the connections should be done at this
point. Place the bottom cover back on the inverter and
secure it with the eleven screws.
TURNING THE SYSTEM ON
Step 1. Turn the on/off switch, located on the bottom of the case, to the on position. This will put the
inverter into standby power.
If the inverter only has battery input, no PV and Grid, then continue to Step 2.
If the inverter has PV, Grid or multi input, then the system will automatically start.
Step 2. To start the inverter, hold down the Enter key,
located on the display panel, for about 3
seconds until two beeps are heard. This system should now be on.
