10
Power on/off inspection
•
Sytem On: Long press the power button. You can see
thepower button shows in blue and HMI shows the start-up
image.
•
System Off: Long press the button until the light of power
button off and the HMI shows the shut-down image.
Alos, you could customize the riding information for yourself.
Please follow the instruction as below:
Check the Bolted Parts
Check that the following parts are tightly secured every time before you ride a bike:
•
Check the coupler of front wheel quick release is secured in
place and the word “CLOSED” is
clearly visible. It shall not rotate.
•
Check that the rear wheel and motor are installed and secured properly. All bolted connections
shall be fastened so tightly that they do not budge under extra pulling or pushing of the rear wheel.
•
Check that handle bar and brake levers are secured in place. It shall be impossible to rotate the
handle bar and brake levers.
•
Make sure that the saddle and seat post are secured in place. The attempt to pull or incline the
saddle shall not cause it to move.
•
Check that the luggage carrier is secured in place.
•
All bolted connections shall be fastened securely.
