21
Operation Manual
A. Specification:
1. Input voltage : 100-240Vac 50/60Hz
2. Input current : 2A(max)
3. E_ciency : over 85%
4. Charging mode : with Constant Current & Constant Voltage
5. Output protection : a. Output short circuit protection
b. Charging limiting protection
c. Over Voltage protection
6. Temperature & Humidity : -10-40
℃
& 10% -- 90%
7. Status LED display : Power on before connect to battery --- Green LED
Charging --- Red LED
Finish Charging --- Green LED
8. Dimension : Max --- 132*57*30(mm)
B. Trouble shooting :
When getting through AC power, please check the power green LED first
1. If the charger doesn’t work, when the status green LED is on, please check as below:
a. If the output plug is well connected or is it with reverse polarity?
Please confirm the connection of the connector.
b. If the battery is out of use?
Please replace of the new battery
2. When power green LED is o_, please check ;
a. If the AC plug is well connected? Please confirm the connection of the AC plug
b. If the power switch is on? Please turn on the power switch before charging
c. If the charger broken? Please send back to repair
C. Attention :
1. The charger is designed for Li-ion battery only
2. Please operate charger in an open area to keep good ventilation
3. This charger is only for indoor used.
4. If there is any problem, please return to local dealer or services center
Do not try to open and repair the charger by yourself
Caution:
The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction
Children being supervised not to play with the appliance
Specify the types, the number of cells and the rated capacity of the battery which can be charged;
Include a warning against recharging non-rechargeable batteries;