4
1. SAFETY
This manual provides the instructions necessary to operate the V402+ SpO2/TEMP patient
monitor in accordance with its function and intended use.
NOTE
Adherence to this manual is a requirement for proper performance and correct
operation of the V402, and ensures patient and operator safety.
This manual is an integral part of and should always be kept close to the monitor, so that it
can be to hand when necessary.
Content of this manual is subject to change without prior notice.
Statement
The manufacturer is responsible for safety, reliability and performance of this product only
in the condition that:
•
All installation operations, expansions, changes, modifications and repairs of this
product are conducted by manufacturer authorized personnel
•
The electrical installation of the relevant room complies with the applicable national
and local requirements
•
This product is operated under strict observance of this manual.
The safety statements presented in this chapter refer to the basic safety information that
the operator of the monitor shall pay attention to and abide by. There are additional safety
statements in other chapters or sections, which may be the same as or similar to the
followings, or specific to the operations.
The following safety terms warning and caution are used throughout this manual to point
out hazards and to designate a degree or level or seriousness.
WARNING Indicates a potential hazard situation or unsafe practice that, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a potential hazard or unsafe practice that, if not avoided, could result
in minor personal injury or product/property damage.
NOTE: Provides application tips or other useful information to ensure that you get the
most from your product.