DARAY SL730 Series, Руководство по эксплуатации и установке

Страница: 14 / 48

Page 13 of 43
Fig.10
Locate the Light head + Suspension arm 2
nd section (Hook arm) – these parts should arrive
already connected to each other.
Make the electrical connection between the Hook arm and the Suspension arm attached to
the upstand (see fig.10).
NOTE: It may be necessary to also remove the small grub
screw in order to fit these two parts together (see fig.11). If
you have removed this part, it is important that this part be
refitted after assembly (see fig.13).
Fig.11
Secure together with the three screws supplied (see fig.12).
Fig.12 Fig.13
Slide the blue rubber collar over this joint to finish. (see fig.14)
Warning, without the lighthead
attached, this arm will spring
upwards rapidly.
Keep control of the arm at all times
and avoid any obstructions in its
path.