PCIe-FRM11 User’s Manual (Rev 1.4)
-
29
- http://www.daqsystem.com
(13)
„Frame View‟ button
When you click, the screen displays only once.
(14)
„Auto View‟ click
When you click, the screen shows video.
(15)
„R_B Swap‟ click
Converts the color of the image. (Red <-> Blue)
(16)
„Auto Save‟ click
Saves the image to the selected JPEG or BMP file in the folder specified by Select Folder.
JPEG storage is not supported on 64bit OS. The Save Count below shows the number of
stored frames.
(17)
„Close Device‟ button
Press this button to finish usage of the board and terminate the program.
5.1.2 Functions related to DIO
(1) „
DIO Read‟ button
Press this button to read the data on General Purpose I/O port. Reading Data are recorded the
editor box beside the button
(2) „
DIO Write‟ button
Press this button to write the data on General Purpose I/O port. You can directly write the data
in the editor box beside the button.
Note) When f000 is written, it becomes CC alternate output. If it is 0, it becomes Digital Out.
bit0 (CC1 configure) = "0": digital out1 / "1": alternate (Trigger1 output)
bit1 (CC2 configure) = "0": digital out2 / "1": alternate (Trigger2 output)
bit2 (CC3 configure) = "0": digital out3 / "1": Reserved
bit3 (CC4 configure) = "0": digital out4 / "1": Reserved
5.1.3 Functions related to UART
(1)
„UART_Init‟ button
Initialize UART related functions. Initialize only once when power is first applied.
Содержание PCIe-FRM11
Страница 22: ...PCIe FRM11 User s Manual Rev 1 4 22 http www daqsystem com click Next as in the figure...
Страница 24: ...PCIe FRM11 User s Manual Rev 1 4 24 http www daqsystem com Figure 4 2 System Properties window Hardware Tab...
Страница 37: ...PCIe FRM11 User s Manual Rev 1 4 37 http www daqsystem com A 2 Physical Dimension P1 J1 120 8 68...
