DAPAudio MPXA-80, Инструкция по эксплуатации

Страница: 9 / 20

7
33. 8
Ω
terminal
Connect this terminal to the + terminal of your 8
Ω
speaker(s). In case of using several speakers make
sure that the total speaker load is 8
Ω
. The total power rating for each channel of the low impedance
speakers should be at least 80W.
34. 70V terminal
Connect this terminal to the + terminal of your 70V speaker(s). In case of using several speakers make
sure all speakers are wired in parallel.
The total power rating of the 70V-speakers for each channel
should never exceed 80W.
35. 100V terminal
Connect this terminal to the + terminal of your 100V speaker(s). In case of using several speakers
make sure all speakers are wired in parallel. The total power rating of the 100V-speakers for each
channel should never exceed 80W.
36.
GND Screw
This screw offers a separate ground connection. Can be useful in case of grounding problems.
37. Gain
Use to adjust the level of the incoming telephone signal.
38. Input 4 Impedance/level switch
Each input can be customized using 4 dipswitches. You can select 4 options. For more details see
page 10.
39. Input 4.1 terminal
I nput 1 for channel 4. Accepts balanced or unbalanced inputs.
40. Input 4.2 terminal
I nput 2 for channel 4. Accepts balanced or unbalanced inputs.
41. Input 3 Impedance/level switch
Each input can be customized using 4 dipswitches. You can select 4 options. For more details see
page 10.
42. Input 3 terminal
I nput for channel 3. Accepts balanced or unbalanced inputs.
43. Input 2 Impedance/level switch
Each input can be customized using 4 dipswitches. You can select 4 options. For more details see
page 10.
44. Input 2 terminal
I nput for channel 2. Accepts balanced or unbalanced inputs.
45. Input 1 Impedance/level switch
Each input can be customized using 4 dipswitches. You can select 4 options. For more details see
page 10.
46. Input 1 terminal
I nput for channel 1. Accepts balanced or unbalanced inputs.