DAPAudio MPXA-80, Инструкция по эксплуатации

Страница: 10 / 20

8
Tuner
Fig. 3
47. AM/FM radio selection button (AM/FM)
Use this button to select the desired band. You can change the band between AM and FM, when
you press this button.
48. Tuning Up button
Use this button to select the desired station. If the UP button is pressed for longer than 1.5 seconds,
the AM frequency automatically increases with 9Khz intervals, while the FM frequency automatically
increases with 0.1Mhz intervals, till the radio is tuned in. To Stop the selection manually, press the
UP button again during automatically tuning.
49. Tuning Down button
Use this button to select the desired station. If the DOWN button is pressed for longer than 1.5 seconds,
the AM frequency automatically decreases with 9Khz intervals, while the FM frequency automatically
decreases with 0.1Mhz intervals, till the radio is tuned in. To Stop the selection manually, press the
DOWN button again during automatically tuning.
50. MEMORY button
If the MEMORY button is pressed, then press any of the selection buttons (M1-M5), the frequency
shown on the display is stored together with the memory number. Stored data is kept for about one
week, even when the power is not supplied.
51. Selection button (M1-M5)
Up to 5 AM and 5 FM stations can be stored. Press this button to show the stored station frequency
and memory number on the display.
52. Power On/Off
Turn the Radio ON/OFF
53. Display
This display indicates the receiving frequency and memory number. When the display is dimmed, the
radio is switched off.
54. Volume Up
Press to increase the output level of the tuner.
55. Volume Down
Press to decrease the output level of the tuner.