DAPAudio GIG-124C, Руководство пользователя

Страница: 11 / 24

10
GIG-124C
Order code: D2284
28. AUX 1 SEND
The Master AUX 1 SEND control adjusts the signals volume level of the respective aux send connector. This
way you adjust the sum of the AUX signal on the input channels.
29. ST RETURNS TO AUX
This control assigns the ST RETURN signal to their respective AUX SEND outputs.
30. ST RETURNS TO MAIN
This control assigns the ST RETURN signal to their respective MAIN MIX outputs.
31. PHANTOM LED
This LED indicates when the phantom power is switched on for the microphone inputs.
32. PWR LED
This LED indicates when the power is switched on.
33. 2TK IN / OUT
TAPE IN
The CD/TAPE input connectors are used to hook up CD players,
tape decks or other line-level sources.
TAPE OUT
The CD/TAPE output connectors provide the stereo main mix
signal to a tape deck or DAT recorder to record your mix.
34. MAIN MIX OUTPUT
The MAIN MIX outputs are balanced XLR connectors - 1/4" TRS
sockets and provide the main mix signal.
35. ST RETURNS
The ST RETURNS inputs L and R let you connect the mixer to
additional equipment (players, effects processors, submixers,
etc.).
36. CTRL-ROOM
The CTRL-ROOM outputs will be used to send the signal to studio
monitor speakers.
37. AUX 1 SEND
The AUX 1 SEND output provides the signal of the AUX 1 bus.
38. GR1/2 OUT
The GR1/2 SEND output provides the signals of the GROUP1/2 bus.
39. PHONES
The PHONES output lets you plug in your headphones.
40. AUX 2 SEND
The AUX 2 SEND output provides the signal of the AUX 2 bus.