DAPAudio GIG-12, Руководство по эксплуатации продукта

Страница: 17 / 23

16
54. Aux 1 return input
Use this input as an additional stereo input or as an effect return.
Warning: If you use the aux 1 return (54) input in combination with the aux send (60) output as an effect
send return, make sure this control is set to its minimum position (fully counterclockwise) otherwise you
will create a feedback loop. If you’re using this as an effect return you have to adjust the return level with
the aux 1 ST/sub (37) control.
55. Aux 2 Return Input
Use this input as an additional stereo input or as an effect return.
Warning: If you use the aux 2 return (55) input in combination with the aux send (60) output as an effect
send return, make sure this control is set to its minimum position (fully counterclockwise) otherwise you
will create a feedback loop. If you’re using this as an effect return you have to adjust the return level with
the aux 2 ST/sub (39) control.
56. Stereo sub outputs
Unbalanced 6,3mm jacks.
57. Stereo control room outputs
Unbalanced 6,3mm jacks.
58. Stereo (main) outputs
Unbalanced 6,3mm jacks.
59. Stereo (main) outputs
Balanced male XLR.
60. Aux send output
Use this output to connect the input of an effect processor or use it as a separate mono output ie. To
connect a monitor speaker.
Make sure that when you use this output as an effect send in combination with the aux 1 or aux 2
return(s), to turn the corresponding aux return control fully counterclockwise at its minimum setting.
61. EFX send output
Use this output in combination with the aux 1 (54) or aux 2 (55) return to connect the input of an external
effect processor in parallel with the internal effects processor.
Make sure that when you use this output as an effect send in combination with the aux 1 (54) or aux 2
(55) return(s), to turn the corresponding aux return (31,35) control fully counterclockwise at its minimum
setting.