6
Backside
Fig. 2
19)
Record RCA Unbalanced Out
27)
Channel 4 L2 RCA Input
20)
Channel 4 L1 RCA Input
28)
Channel 3 L2 RCA Input
21)
Channel 3 Level Selector
29)
Channel 3 PH1L1 RCA Input
22)
Channel 2 Level Selector
30)
Channel 2 L2 RCA Input
23)
Channel 1 L1 RCA Input
31)
Channel 2 PH1/L1 RCA Input
24)
GND
32)
Channel 1 L2 RCA Input
25)
AC Inlet with integrated fuse holder
33)
Mic 2 Jack Unbalanced Input
26)
Master RCA Unbalanced Out
Installation
Remove all packing materials from the DS-CM-4. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Functions
1. MIC
Electronically balanced XLR-type input for connecting low impedance
microphone. The input has exremely low noise and hum processing. When
connecting a microphone make sure that the pin assignment
is correct. Always make sure to read the manual of the microphone you want to
connect. The XLR- input is not suitable for connecting an additional mixing
console, FX- unit, etc. You have to use the LINE-inputs, when connecting this kind
of equipment.
Note:
When connecting signal sources, please make sure that the corresponding
channel faders and the master faders are at minimum settings. Otherwise
unpleasant plug-in noise can occur.
2. MIC Channel ON Switch
Use this switch to enable the Mic channel.
3. DJ MIC Level
Controls the volume of the Microphone channel.
Содержание DS-CM-4
Страница 1: ...DS CM 4 ORDERCODE D2180...
Страница 15: ...2009 DapAudio...
